TL7705ACD
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7705 |
| Output | Complementary |
| Pin Count | 8 |
| Output Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.8mA |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.55V |
| Overvoltage Threshold | 4.6V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
TL7705ACD Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. Pin count of the power management is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3.5V. There should be no more than 18V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Complementary. It is estimated that the voltage supervisor's supply current is 1.8mA. You can always use TL7705, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3mA can be used with this power management.
TL7705ACD Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7705ACD Applications
There are a lot of Texas Instruments TL7705ACD Voltage Supervisors applications.
- Medical-specific isolation transformer
- Digitally controlled LDO regulators circuit
- Kitchen appliances
- Consumer electronics
- Efficient information transmission
- Solar power charger
- Satellite navigation
- Network equipment
- Automotive permanent magnet synchronous motors
- Data storage applications
