TL7705AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7705 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.55V |
| Overvoltage Threshold | 4.6V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7705AID Overview
This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. In a 5V supply voltage, the power management conducts. Power management conducts at a voltage of 1. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3.5V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 18V volts in this IC management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Complementary. As far as the supply current of the power management is concerned, it is 1.8mA. A similar IC managements number of the manufacturer can always be found by using TL7705, the base power ics number. A maximum supply temperature of 3mA can be used with this power management.
TL7705AID Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7705AID Applications
There are a lot of Texas Instruments TL7705AID Voltage Supervisors applications.
- Microprocessor system
- Magnetic resonance imaging
- Set top box
- Automotive power systems
- Analog circuit
- emergency room
- DC stabilized power supply module
- Important electronics for automotive safety
- Fire equipment power monitoring system
- Power communication system
