TL7705BCP
| Parameters | |
|---|---|
| Reset Timeout | 270 ns Typical Propagation Delay |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.55V |
| Overvoltage Threshold | 4.6V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL7705 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.6V |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Max Supply Current | 3.5mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1.8mA |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
TL7705BCP Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tube, power management is easy to use. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. This power management system has 8 pins. IC management can only work with a supply voltage of 3.6V volts. The supply voltage (Vsup) should not exceed 18V volts in this IC power. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The output voltage of this power managment ic during operation is Complementary. Supplied with a operating current of 1.8mA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. A similar IC managements number of the manufacturer can always be found by using TL7705, the base power ics number. Voltage supervisor can work with a supply temperature of 3.5mA at the most.
TL7705BCP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7705BCP Applications
There are a lot of Texas Instruments TL7705BCP Voltage Supervisors applications.
- Multi-voltage system
- Microprocessor system
- emergency room
- Analog circuit
- Military electronics
- Telecommunications equipment
- Low voltage/high power - AI, GPU
- Data storage applications
- Detection of phase sequence
- Urban rail transit weak current power monitoring
