TL7705BIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7705 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.6V |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 3.5mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.55V |
| Overvoltage Threshold | 4.6V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7705BIDR Overview
There are 8 terminals on this power management that allow it to be mounted. A Cut Tape (CT) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 8 pins on power management. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.6V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 18V volts. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Complementary as the output voltage. The supervisor's supply current is specified to 1.8mA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use TL7705, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 3.5mA at the most.
TL7705BIDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7705BIDR Applications
There are a lot of Texas Instruments TL7705BIDR Voltage Supervisors applications.
- Power distribution systems of CCU
- Multi-voltage system
- Dash board
- Fire equipment power monitoring system
- Urban rail transit weak current power monitoring
- Detection of phase sequence
- Kitchen appliances
- Power communication system
- DVR
- Battery-powered equipment
