TL7705BIP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL7705 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.6V |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Max Supply Current | 3.5mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | +4.55V |
| Overvoltage Threshold | 4.6V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7705BIP Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Power management is packaged in a Tube way. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. Pin count of the power management is 8. Supply voltage (Vsup) should be at least 3.6V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 18V volts. In this case, Through Hole is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Complementary of output voltage. There is a supply current of 1.8mA for the power management. Among other features, IC power can be also taken advantage of [0], for instance. To find similar IC managements from the manufacturer, you can always search by TL7705. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.5mA.
TL7705BIP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7705BIP Applications
There are a lot of Texas Instruments TL7705BIP Voltage Supervisors applications.
- Cloud computing
- Radar
- Microcontroller system
- Military communications
- WiFi router
- Medical-specific insulation monitor
- Detection of phase sequence
- Smartphones
- Power distribution systems of ICU
- Electronics installed in the vehicle
