Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TL7705 |
Output |
Complementary |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3.6V |
Operating Supply Current |
3.5mA |
Max Supply Current |
3.5mA |
Adjustable Threshold |
YES |
Quiescent Current |
1.8mA |
Watchdog Timer |
No |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.55V |
Number of Voltages Monitored |
1 |
Reset Timeout |
270 ns Typical Propagation Delay |
Min Reset Threshold Voltage |
4.5V |
Max Reset Threshold Voltage |
4.6V |
Threshold Voltage |
+4.55V |
Undervoltage Threshold |
4.5V |
Overvoltage Threshold |
4.6V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL7705BQDG4 Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Tube-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. There are 8 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 3.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 18V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Complementary. In order to maintain a stable supply current for the power management, 3.5mA is the recommended value. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using TL7705, the base power ics number. The maximum supply temperature voltage supervisor can handle is 3.5mA.
TL7705BQDG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
3.5mA operating supply current
TL7705BQDG4 Applications
There are a lot of Texas Instruments TL7705BQDG4 Voltage Supervisors applications.
- Leakage current detection
- Insulation fault location system
- Automotive power systems
- Functional modules
- DSP
- Electrical fire monitoring system
- Utility meter
- Display equipment
- Dash board
- Detection of phase imbalance