TL7709ACD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7709 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 7.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 7.5V |
| Max Reset Threshold Voltage | 7.7V |
| Threshold Voltage | +7.6V |
| Overvoltage Threshold | 7.7V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7709ACD Overview
A total of 8 terminals are used to mount this power management. A Tube package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 8 pins on the board. This power management system has 8 pins. IC management can only work with a supply voltage of 3.5V volts. The maximum supply voltage (Vsup) is not to exceed 18V volts in this IC management. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during 0°C~70°C TA . As this power managment ic operates, it is able to produce an output voltage of Complementary. Supplied with a operating current of 1.8mA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to TL7709, the base PMIC number. The power management can work with a maximum supply temperature of 3mA.
TL7709ACD Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7709ACD Applications
There are a lot of Texas Instruments TL7709ACD Voltage Supervisors applications.
- Electronics installed in the vehicle
- Utility meter
- Microcontroller system
- WiFi router
- Radar
- Power communication system
- Detection of phase loss
- Insulation fault location system
- Power distribution systems of CCU
- Detection of phase sequence
