TL7709ACDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7709 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 3mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 7.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 7.5V |
| Max Reset Threshold Voltage | 7.7V |
| Threshold Voltage | +7.6 |
| Undervoltage Threshold | 7.5V |
| Overvoltage Threshold | 7.7V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7709ACDG4 Overview
As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Tube. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 8 pins. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.5V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 18V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. During operation, this power management system outputs Complementary. It is estimated that the voltage supervisor's supply current is 3mA. It is always advisable to use TL7709, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 3mA can be used with this power management.
TL7709ACDG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
3mA operating supply current
TL7709ACDG4 Applications
There are a lot of Texas Instruments TL7709ACDG4 Voltage Supervisors applications.
- Power distribution systems of ICU
- Refrigeration
- Power distribution systems of operating room
- Rechargeable batteries
- Important electronics for automotive protection
- Insulation fault location system
- Battery-powered equipment
- Analog circuit
- Detection of phase imbalance
- Electrical fire monitoring system
