TL7709ACP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL7709 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 7.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 7.5V |
| Max Reset Threshold Voltage | 7.7V |
| Threshold Voltage | +7.6V |
| Overvoltage Threshold | 7.7V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7709ACP Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tube way. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When 5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. This power management has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3.5V. During this IC power, the maximum supply voltage (Vsup) should not exceed 18V volts. The recommended mounting type is Through Hole. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Complementary. Supplied with a operating current of 1.8mA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by TL7709. Voltage supervisor can work with a supply temperature of 3mA at the most.
TL7709ACP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7709ACP Applications
There are a lot of Texas Instruments TL7709ACP Voltage Supervisors applications.
- Unattended substation automation
- Sensitive sensors
- DSP
- Digitally controlled LDO regulators circuit
- Radio
- Important electronics for automotive safety
- Fire equipment power monitoring system
- Satellite navigation
- Electronics installed in the vehicle
- Consumer electronics
