banner_page

TL7712ACDRE4

5V8 Terminals 8-Pin TL7712 Voltage supervisor1 Channels Min 3.5V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL7712ACDRE4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 275
  • Description: 5V8 Terminals 8-Pin TL7712 Voltage supervisor1 Channels Min 3.5V Max 18V (Kg)

Details

Tags

Parameters
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TL7712
Output Complementary
Pin Count 8
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 3.5V
Operating Supply Current 1.8mA
Max Supply Current 3mA
Adjustable Threshold NO
Quiescent Current 1.8mA
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 10.8V
Number of Voltages Monitored 1
Reset Timeout 1μs Maximum Propagation Delay
Min Reset Threshold Voltage 10.6V
Max Reset Threshold Voltage 11V
Threshold Voltage +10.8V
Overvoltage Threshold 11V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tape & Reel (TR)

TL7712ACDRE4 Overview


Power management is mounted through 8 terminals. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management belongs to the Power Management Circuits subcategory. A total of 8 pins are located on this power management. There are 8 pins on the supervisor. A voltage (Vsup) that doesn't fall below 3.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 18V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. Power management has an output of Complementary during operation. In order to maintain a stable supply current for the power management, 1.8mA is the recommended value. It is always advisable to use TL7712, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 3mA.

TL7712ACDRE4 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current

TL7712ACDRE4 Applications


There are a lot of Texas Instruments TL7712ACDRE4 Voltage Supervisors applications.

  • Multi-voltage system
  • Low voltage/high power - AI, GPU
  • Linux and server computing
  • Microcontroller system
  • Battery-powered equipment
  • Radar
  • DVR
  • Important electronics for automotive protection
  • Detection of phase loss
  • Radio

Write a review

Note: HTML is not translated!
    Bad           Good