TL7712AIDR
| Parameters | |
|---|---|
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 3mA |
| Max Supply Current | 3mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 10.8V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 10.6V |
| Max Reset Threshold Voltage | 11V |
| Threshold Voltage | +10.8V |
| Undervoltage Threshold | 10.6V |
| Overvoltage Threshold | 11V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7712 |
| Output | Complementary |
TL7712AIDR Overview
There are 8 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 8 pins. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.5V. During this IC power, the maximum supply voltage (Vsup) should not exceed 18V volts. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Complementary during operation. There is a 3mA supply current present in the power management. You can always use TL7712, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3mA can be used with this power management.
TL7712AIDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
3mA operating supply current
TL7712AIDR Applications
There are a lot of Texas Instruments TL7712AIDR Voltage Supervisors applications.
- Refrigeration
- Stable power system
- DSP
- Microprocessor system
- DC stabilized power supply module
- Medical-specific isolation transformer
- External alarm
- Microcontroller system
- Detection of phase loss
- Dash board
