TL7733BCD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7733 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.6V |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 3.5mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1.8mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Min Reset Threshold Voltage | 3.03V |
| Max Reset Threshold Voltage | 3.13V |
| Threshold Voltage | 3.08 |
| Overvoltage Threshold | 3.13V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7733BCD Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. In a 5V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. There are 8 pins on the supervisor. IC management can only work with a supply voltage of 3.6V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 18V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. During operation, this power management system outputs Complementary. The power management's supply current is 1.8mA. Power management is also possible to add other features such as POWER-ON RESET GENERATOR to name a few. A similar IC managements number of the manufacturer can always be found by using TL7733, the base power ics number. The maximum supply temperature that PMIC chip can work with is 3.5mA.
TL7733BCD Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7733BCD Applications
There are a lot of Texas Instruments TL7733BCD Voltage Supervisors applications.
- Battery-powered equipment
- Digitally controlled LDO regulators circuit
- Electric heating appliances
- Detection of phase loss
- Computer applications
- DVR
- Refrigeration
- Set top box
- Utility meter
- Automotive permanent magnet synchronous motors
