banner_page

TL7733BCDG4

5V8 Terminals 8-Pin TL7733 Voltage supervisor1 Channels Min 3.6V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL7733BCDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 767
  • Description: 5V8 Terminals 8-Pin TL7733 Voltage supervisor1 Channels Min 3.6V Max 18V (Kg)

Details

Tags

Parameters
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature POWER-ON RESET GENERATOR
Subcategory Power Management Circuits
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TL7733
Output Complementary
Pin Count 8
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 3.6V
Operating Supply Current 3.5mA
Max Supply Current 3.5mA
Adjustable Threshold YES
Quiescent Current 1.8mA
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 3.08V
Number of Voltages Monitored 1
Reset Timeout 270 ns Typical Propagation Delay
Min Reset Threshold Voltage 3.03V
Max Reset Threshold Voltage 3.13V
Threshold Voltage +3.08V
Undervoltage Threshold 3.03V
Overvoltage Threshold 3.13V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube

TL7733BCDG4 Overview


It is mounted through 8 terminals on the power management. Power management is packaged in a Tube way. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. When a supply voltage of 1 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. The pins of the power management system count 8. There should be a minimum voltage supply (Vsup) of 3.6V for this PMIC. There should be no more than 18V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Complementary. In order to maintain a stable supply current for the power management, 3.5mA is the recommended value. In addition, IC management are other features such as [0], to mention only a few. You can always use TL7733, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3.5mA can be used with this power management.

TL7733BCDG4 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
3.5mA operating supply current

TL7733BCDG4 Applications


There are a lot of Texas Instruments TL7733BCDG4 Voltage Supervisors applications.

  • Insulation fault location system
  • Microprocessor system
  • Low voltage/high power - AI, GPU
  • Set top box
  • Personal computers
  • Stable power system
  • Automotive power systems
  • Power distribution systems of CCU
  • Detection of phase loss
  • Display equipment

Write a review

Note: HTML is not translated!
    Bad           Good