TL7733BID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7733 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.6V |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 3.5mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1.8mA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Min Reset Threshold Voltage | 3.03V |
| Max Reset Threshold Voltage | 3.13V |
| Threshold Voltage | 3.08 |
| Undervoltage Threshold | 3.08V |
| Overvoltage Threshold | 3.13V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7733BID Overview
A total of 8 terminals are used to mount this power management. Tube-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 5V supply voltages. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 8 pins in it. The pins of the power management system count 8. Supply voltage (Vsup) should be at least 3.6V for this power management. The supply voltage (Vsup) should not exceed 18V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Complementary. The supervisor's supply current is specified to 1.8mA. There are other features such as POWER-ON RESET GENERATOR to name a few. For similar manage ics search of the manufacturer, you can always refer to TL7733, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.5mA.
TL7733BID Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7733BID Applications
There are a lot of Texas Instruments TL7733BID Voltage Supervisors applications.
- Data storage applications
- Urban rail transit weak current power monitoring
- Important electronics for automotive safety
- Radar
- FPGA design
- Power distribution systems of operating room
- Power distribution systems of ICU
- Medical-specific insulation monitor
- Smartphones
- Military communications
