TL7757CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Base Part Number | TL7757 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.4mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.4mA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.43V |
| Max Reset Threshold Voltage | 4.67V |
| Threshold Voltage | 4.55 |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.67V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7757CDR Overview
Power management is mounted through 8 terminals. Packaged in the form of a Cut Tape (CT), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 4.3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. This power ic can be sub-categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 1.4mA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TL7757, which is the base power ics number. The power management can work with a maximum supply temperature of 2mA.
TL7757CDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current
TL7757CDR Applications
There are a lot of Texas Instruments TL7757CDR Voltage Supervisors applications.
- Efficient information transmission
- Embedded computing
- Battery cars
- FPGA design
- Military electronics
- Military communications
- DC stabilized power supply module
- Utility meter
- Important electronics for automotive protection
- Smartphones
