TL7757CLPE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Surface Mount | NO |
| Number of Pins | 3 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Base Part Number | TL7757 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.4mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.4mA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.43V |
| Max Reset Threshold Voltage | 4.67V |
| Threshold Voltage | 4.55 |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.67V |
| Height | 5.34mm |
| Length | 4.3mm |
| Width | 4.3mm |
| Thickness | 3.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7757CLPE3 Overview
Power management is mounted through 3 terminals. In terms of packaging, power management follows the Bulk model. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. A supply voltage of 4.3V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 3. This power management has 3 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 7V volts in this IC power. Through Hole mounting is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. As far as the supply current of the power management is concerned, it is 1.4mA. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use TL7757, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 2mA.
TL7757CLPE3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current
TL7757CLPE3 Applications
There are a lot of Texas Instruments TL7757CLPE3 Voltage Supervisors applications.
- Dash board
- Analog circuit
- Power distribution systems of infant care room
- Automotive power systems
- Power distribution systems of ICU
- Electronics installed in the vehicle
- emergency room
- Battery cars
- Cloud computing
- Display equipment
