TL7757ILP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Surface Mount | NO |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Base Part Number | TL7757 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Max Output Current | 20A |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 1.4mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.4mA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.43V |
| Max Reset Threshold Voltage | 4.67V |
| Threshold Voltage | 4.55 |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.67V |
| Height | 5.34mm |
| Length | 4.3mm |
| Width | 4.3mm |
| Thickness | 3.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7757ILP Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. There is a Bulk-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. When a supply voltage of 4.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 3 pins on IC management. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 7V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Through Hole. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 1.4mA. There are also other features in the software such as [0], just to mention a few. It is always advisable to use TL7757, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 2mA.
TL7757ILP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current
TL7757ILP Applications
There are a lot of Texas Instruments TL7757ILP Voltage Supervisors applications.
- Display equipment
- Radar
- Important electronics for automotive safety
- Smartphones
- Stable power system
- FPGA design
- Personal computers
- Detection of phase loss
- Computer applications
- Automotive permanent magnet synchronous motors
