banner_page

TL7759CDR

4.3V8 Terminals 8-Pin TL7759 Voltage supervisor1 Channels Min 1V Max 7V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL7759CDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 723
  • Description: 4.3V8 Terminals 8-Pin TL7759 Voltage supervisor1 Channels Min 1V Max 7V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR
Subcategory Power Management Circuits
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.3V
Base Part Number TL7759
Output Push-Pull, Totem Pole
Pin Count 8
Number of Channels 1
Max Supply Voltage 7V
Min Supply Voltage 1V
Operating Supply Current 1.4mA
Max Supply Current 2mA
Adjustable Threshold NO
Quiescent Current 1.4mA
Reset Active High
Number of Voltages Monitored 1
Reset Timeout 5μs Maximum Propagation Delay
Min Reset Threshold Voltage 4.43V
Max Reset Threshold Voltage 4.67V
Threshold Voltage +4.55V
Undervoltage Threshold 4.55V
Overvoltage Threshold 4.67V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TL7759CDR Overview


There are 8 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. In a 4.3V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 8 pins. There are 8 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 7V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 1.4mA volt supply current. The other features include, for example, [0], which is just one example. You can always use TL7759, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 2mA.

TL7759CDR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current

TL7759CDR Applications


There are a lot of Texas Instruments TL7759CDR Voltage Supervisors applications.

  • emergency room
  • Solar power charger
  • Multi-voltage system
  • Dash board
  • Telecommunications equipment
  • Data storage applications
  • Low voltage/high power - AI, GPU
  • External alarm
  • Leakage protection
  • Sensitive sensors

Write a review

Note: HTML is not translated!
    Bad           Good