TL7759CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL7759 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Output Voltage | 15V |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.4mA |
| Output Current | -8mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.4mA |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.43V |
| Max Reset Threshold Voltage | 4.67V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.67V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7759CP Overview
There are 8 terminals on this power management that allow it to be mounted. Tube-packaging is used. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When 4.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. It is possible to subcategorize this power ic as a Power Management Circuits chip. 8 pins are present in total in this power management. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Mounting type Through Hole is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 1.4mA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A similar IC managements number of the manufacturer can always be found by using TL7759, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 2mA.
TL7759CP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current
TL7759CP Applications
There are a lot of Texas Instruments TL7759CP Voltage Supervisors applications.
- Military electronics
- DVR
- WiFi router
- Multi-voltage system
- Utility meter
- Power distribution systems of infant care room
- Rechargeable batteries
- Important electronics for automotive protection
- Microprocessor system
- Kitchen appliances
