TL7759CPSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Base Part Number | TL7759 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.4mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.4mA |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.43V |
| Max Reset Threshold Voltage | 4.67V |
| Threshold Voltage | 4.55 |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.67V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7759CPSR Overview
It is mounted through 8 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. There are 8-SOIC (0.209, 5.30mm Width) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 4.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. There is a subcategory called Other Analog ICs for this power management. The total number of pins on this power management is 8. Power managment ic pin count is 8. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 1.4mA. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to TL7759, which is the base power ics number. Voltage supervisor can work with a supply temperature of 2mA at the most.
TL7759CPSR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current
TL7759CPSR Applications
There are a lot of Texas Instruments TL7759CPSR Voltage Supervisors applications.
- Battery cars
- Detection of phase loss
- Display equipment
- Battery-powered equipment
- Medical-specific isolation transformer
- External alarm
- Electronics installed in the vehicle
- Low voltage/high power - AI, GPU
- emergency room
- Precision measurement
