TL7759CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL7759 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.4mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.4mA |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Maximum Propagation Delay |
| Min Reset Threshold Voltage | 4.43V |
| Max Reset Threshold Voltage | 4.67V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.67V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7759CPWR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. In terms of packaging, power management follows the Cut Tape (CT) model. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 8-TSSOP (0.173, 4.40mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 4.3V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 8 pins are located on this power management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 1.4mA. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR to name a few. To find similar IC managements from the manufacturer, you can always search by TL7759. The maximum supply temperature is 2mA.
TL7759CPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current
TL7759CPWR Applications
There are a lot of Texas Instruments TL7759CPWR Voltage Supervisors applications.
- Insulation fault location system
- Linux and server computing
- Personal computers
- Analog circuit
- Functional modules
- Urban rail transit weak current power monitoring
- Important electronics for automotive protection
- Electric heating appliances
- Power distribution systems of operating room
- Set top box
