TL7770-5CDW
| Parameters | |
|---|---|
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7770 |
| Output | Complementary |
| Pin Count | 16 |
| Output Voltage | 5V |
| Max Output Current | 16mA |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Adjustable Threshold | NO |
| Quiescent Current | 5mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 5V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.46V |
| Height | 2.65mm |
| Length | 10.3mm |
TL7770-5CDW Overview
Power management is mounted through 16 terminals. Packaged in the form of a Tube, power management is easy to use. To assist you, this IC power includes 1 functions. Power management consists of 2 channels, each of which can be used independently. In this PMIC, you can find 16-SOIC (0.295, 7.50mm Width) functions for your reference. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 5V supply voltage, the power management conducts. When a supply voltage of 2 is applied to the power ic, it conducts. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. There are 16 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3.5V volts. This IC power should be powered by no more than 18V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Complementary. In order to maintain a stable supply current for the power management, 5mA is the recommended value. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by TL7770. The maximum supply temperature that PMIC chip can work with is 5mA.
TL7770-5CDW Features
Multi-Voltage Supervisor type
Minimum supply voltage of 3.5V
5mA operating supply current
TL7770-5CDW Applications
There are a lot of Texas Instruments TL7770-5CDW Voltage Supervisors applications.
- Military communications
- Cloud computing
- Military electronics
- Detection of phase imbalance
- Battery-powered equipment
- Urban rail transit weak current power monitoring
- Power distribution systems of infant care room
- Transformer load monitoring equipment
- Power distribution systems of ICU
- Multi-voltage system
