banner_page

TL7770-5CN

5V16 Terminals 16-Pin TL7770 Voltage supervisor2 Channels Min 3.5V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL7770-5CN
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 425
  • Description: 5V16 Terminals 16-Pin TL7770 Voltage supervisor2 Channels Min 3.5V Max 18V (Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature POWER ON RESET GENERATOR
Subcategory Power Management Circuits
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Base Part Number TL7770
Output Complementary
Pin Count 16
Number of Channels 2
Max Supply Voltage 18V
Min Supply Voltage 3.5V
Operating Supply Current 5mA
Max Supply Current 5mA
Adjustable Threshold NO
Quiescent Current 5mA
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 5V Adj
Number of Voltages Monitored 2
Reset Timeout 270 ns Typical Propagation Delay
Threshold Voltage +4.55V
Undervoltage Threshold 4.46V
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active

TL7770-5CN Overview


As you can see, this power management is mounted through 16 terminals. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. Power management consists of 2 channels, each of which can be used independently. There are 16-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 2. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 16 pins are located on this power management. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.5V. The supply voltage (Vsup) should not exceed 18V volts in this IC power. Power management recommends the Through Hole mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Complementary. There is a 5mA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0]. A similar IC managements number of the manufacturer can always be found by using TL7770, the base power ics number. The maximum supply temperature voltage supervisor can handle is 5mA.

TL7770-5CN Features


Multi-Voltage Supervisor type
Minimum supply voltage of 3.5V
5mA operating supply current

TL7770-5CN Applications


There are a lot of Texas Instruments TL7770-5CN Voltage Supervisors applications.

  • Detection of phase imbalance
  • Leakage protection
  • Unattended substation automation
  • Power distribution systems of operating room
  • Smart meter
  • Detection of phase sequence
  • Electric heating appliances
  • Multi-voltage system
  • Household appliances
  • WiFi router

Write a review

Note: HTML is not translated!
    Bad           Good