TL7770-5IDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL7770 |
| Output | Complementary |
| Pin Count | 16 |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 5mA |
| Max Supply Current | 5mA |
| Adjustable Threshold | NO |
| Quiescent Current | 5mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 5V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.46V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7770-5IDWR Overview
A total of 16 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. IC management is packaged as a 16-SOIC (0.295, 7.50mm Width) package. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. When 5V is applied to the power ic, it conducts. A supply voltage of 2 is used to conduct the PMIC chip. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 16 pins that are attached to IC management. 16 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 3.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 18V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Complementary. There is a supply current of 5mA for the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use TL7770, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 5mA can be used with this power management.
TL7770-5IDWR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 3.5V
5mA operating supply current
TL7770-5IDWR Applications
There are a lot of Texas Instruments TL7770-5IDWR Voltage Supervisors applications.
- Microcontroller system
- Detection of phase imbalance
- Battery-powered equipment
- Embedded computing
- Transformer load monitoring equipment
- Digitally controlled LDO regulators circuit
- Detection of phase loss
- Power distribution systems of infant care room
- Electrical fire monitoring system
- Cloud computing
