TL972ID

2 Channels 80mA per Channel 200nA 60 dB Instrumentational OP Amps 0.75μA 6V 2.7V~12V ±1.35V~6V TL972 14 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TL972ID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 946
Description: 2 Channels 80mA per Channel 200nA 60 dB Instrumentational OP Amps 0.75μA 6V 2.7V~12V ±1.35V~6V TL972 14 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Base Part Number	TL972
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	6V
Number of Channels	2
Operating Supply Current	2mA
Nominal Supply Current	5.6mA
Slew Rate	5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	200nA
Voltage - Supply, Single/Dual (±)	2.7V~12V ±1.35V~6V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	4mV
Bandwidth	12MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Unity Gain BW-Nom	12000 kHz
Voltage Gain	80dB
Average Bias Current-Max (IIB)	0.75μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1mV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.75μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	12MHz
Max I/O Voltage	4mV
Power	NO
Input Offset Current-Max (IIO)	0.15μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL972ID Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 14 terminations this year. It consists of a total of 14 pins in total. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 2mA . There should be no change in the voltage gain at 80dB. There are a total of 2 channels available on the op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 6V voltage.