TL974IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Base Part Number | TL974 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Power Supplies | +-2.5V |
| Number of Circuits | 4 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 11.2mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 15V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL974IN Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 1mV for input offset voltage. The mounting type that is recommended for this electrical part is Through Hole. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 2mA . Maintain 80dB as the voltage gain. On this buffer amplifier, there are 4 circuits. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 6V.
TL974IN Features
14 Pins
supply voltage of 2.5V
80dB voltage gain
Output Type: Rail-to-Rail
TL974IN Applications
There are a lot of Texas Instruments TL974IN Instrumentational OP Amps applications.
- ECG equipment
- Video computer boards
- Mobile phone
- Exponential operation circuits
- Weighing systems
- Gaming industry
- Medical imaging
- Active probe
- Television
- Test equipment
