TL974QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Base Part Number | TL974 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-6/2.7/12V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 11.2mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 4mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL974QPWRQ1 Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 14h termination of the year. The total number of pins on linear amplifier is 14. Please take in mind that op amp should be run at 2.5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. Regarding input offset voltage, buffer amplifier rates 4mV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 2mA . The voltage gain should stay at 80dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The linear amplifier consists of 4 different elements in total. The operating supply voltage of instrumentation amplifier is rated 6V voltage. TR is adopted to pack the instrumentation amplifier. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
TL974QPWRQ1 Features
14 Pins
supply voltage of 2.5V
80dB voltage gain
Output Type: Rail-to-Rail
TL974QPWRQ1 Applications
There are a lot of Texas Instruments TL974QPWRQ1 Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Industrial applications including automation
- Vehicle electronics
- Laptop
- Large motor controllers
- single/dual op amp sum and difference circuits
- Exponential operation circuits
- Television broadcasting equipment
- Commercial audio systems
- Portable electronic products powered by batteries
