Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
TLC070 |
Pin Count |
8 |
Operating Supply Voltage |
8V |
Number of Circuits |
1 |
Operating Supply Current |
2.1mA |
Nominal Supply Current |
2.9mA |
Output Current |
57mA |
Slew Rate |
19V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
1.5pA |
Voltage - Supply, Single/Dual (±) |
4.5V~16V ±2.25V~8V |
Output Current per Channel |
57mA |
Input Offset Voltage (Vos) |
390μV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
1.4mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC070AIP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Op amp ic rates 390μV for input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 2.1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 120dB. On this buffer amplifier, there are 1 circuits. The operating supply voltage of the buffer op amp is rated at 8V.
TLC070AIP Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC070AIP Applications
There are a lot of Texas Instruments TLC070AIP Instrumentational OP Amps applications.
- High input resistance broadband
- Medical instruments
- High/low-pass filter circuit
- Video amplifiers
- PDA
- Video computer boards
- Automatic control
- Automation control systems
- Proportional operation circuits
- Displayers for aircraft and air transportation control systems