banner_page

TLC071AIP

1 Channels 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC071 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC071AIP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 464
  • Description: 1 Channels 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC071 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIMOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number TLC071
Pin Count 8
Operating Supply Voltage 8V
Number of Channels 1
Operating Supply Current 2.1mA
Nominal Supply Current 2.9mA
Power Dissipation 1.2W
Output Current 57mA
Slew Rate 19V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 1.5pA
Voltage - Supply, Single/Dual (±) 4.5V~16V ±2.25V~8V
Output Current per Channel 57mA
Input Offset Voltage (Vos) 1.4mV
Bandwidth 10MHz
Unity Gain BW-Nom 10000 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.0007μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 390μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00005μA
Programmable Power NO
Nominal Gain Bandwidth Product 10MHz
Max I/O Voltage 1.4mV
Input Offset Current-Max (IIO) 0.00005μA
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC071AIP Overview


Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 1.4mV for input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 2.1mA volt supply current is needed for this linear amplifier to operate. 120dB should remain the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 8V voltage.

TLC071AIP Features


8 Pins
supply voltage of 5V
120dB voltage gain

TLC071AIP Applications


There are a lot of Texas Instruments TLC071AIP Instrumentational OP Amps applications.

  • Exponential operation circuits
  • Digital cameras
  • Subtraction operation circuits
  • Signal operation
  • Laptop
  • Television broadcasting equipment
  • Band-stop filter
  • Band-pass filter
  • Car stereo
  • Switching amplifier

Write a review

Note: HTML is not translated!
    Bad           Good