TLC072CP

2 Channels 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0001μA 8V 4.5V~16V ±2.25V~8V TLC072 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC072CP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 717
Description: 2 Channels 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0001μA 8V 4.5V~16V ±2.25V~8V TLC072 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC072
Pin Count	8
Operating Supply Voltage	8V
Number of Channels	2
Operating Supply Current	2.1mA
Nominal Supply Current	5.8mA
Power Dissipation	1.2W
Output Current	57mA
Slew Rate	19V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	1.5pA
Voltage - Supply, Single/Dual (±)	4.5V~16V ±2.25V~8V
Output Current per Channel	57mA
Input Offset Voltage (Vos)	1.9mV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	17V
Voltage - Input Offset	390μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	1.9mV
Input Offset Current-Max (IIO)	0.00005μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC072CP Overview

There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 1.9mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 2.1mA. It is recommended to keep the voltage gain at 120dB at all times. 2 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage.