TLC072IP

57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC072 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC072IP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 298
Description: 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC072 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC072
Pin Count	8
Operating Supply Voltage	8V
Number of Circuits	2
Operating Supply Current	2.1mA
Nominal Supply Current	5.8mA
Output Current	57mA
Slew Rate	19V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	1.5pA
Voltage - Supply, Single/Dual (±)	4.5V~16V ±2.25V~8V
Output Current per Channel	57mA
Input Offset Voltage (Vos)	390μV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0007μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	17V
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	1.9mV
Power	NO
Input Offset Current-Max (IIO)	0.00005μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC072IP Overview

Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 390μV voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . You can run this op amp ic on 2.1mA . It is recommended to keep the voltage gain at 120dB at all times. During the manufacturing process, this buffer amplifier is divided into 2 circuits. The operating supply voltage of the buffer op amp is rated at 8V.