TLC073IDGQ

57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC073 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC073IDGQ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 294
Description: 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC073 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	TLC073
Pin Count	10
Operating Supply Voltage	8V
Number of Elements	2
Operating Supply Current	2.1mA
Nominal Supply Current	5.8mA
Power Dissipation	2.39W
Output Current	57mA
Slew Rate	19V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	1.5pA
Voltage - Supply, Single/Dual (±)	4.5V~16V ±2.25V~8V
Output Current per Channel	57mA
Input Offset Voltage (Vos)	1.9mV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0007μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	17V
Voltage - Input Offset	390μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	1.9mV
Input Offset Current-Max (IIO)	0.00005μA
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC073IDGQ Overview

There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. The number of terminations is approaching the 10 mark. There are a total of 10 pins on this op amp. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 10 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.9mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 2.1mA, this op amp ic can operate. 120dB should be the voltage gain. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 8V.