TLC074AIN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC074 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.1mA |
| Nominal Supply Current | 11.6mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1.5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC074AIN Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 14 terminations over the past year. The pins on this board total to 14 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 14 pins. Regarding input offset voltage, op amp rates 390μV. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 2.1mA . Maintain 120dB as the voltage gain. There are 4 circuits on op amps. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC074AIN Features
14 Pins
supply voltage of 5V
120dB voltage gain
TLC074AIN Applications
There are a lot of Texas Instruments TLC074AIN Instrumentational OP Amps applications.
- Video amplifiers
- Information processing
- Gaming industry
- RF cable systems
- Comparator
- Semiconductor detectors
- Exponential operation circuits
- Television
- Ultrasound transducers
- Micro signal measurement
