Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC074 |
Pin Count |
14 |
Operating Supply Voltage |
8V |
Number of Channels |
4 |
Operating Supply Current |
2.1mA |
Nominal Supply Current |
11.6mA |
Power Dissipation |
1.022W |
Output Current |
57mA |
Slew Rate |
19V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
1.5pA |
Voltage - Supply, Single/Dual (±) |
4.5V~16V ±2.25V~8V |
Output Current per Channel |
57mA |
Input Offset Voltage (Vos) |
1.9mV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
17V |
Voltage - Input Offset |
390μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
1.9mV |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC074CD Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. It has 14 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.9mV. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 2.1mA. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC074CD Features
14 Pins
supply voltage of 5V
120dB voltage gain
TLC074CD Applications
There are a lot of Texas Instruments TLC074CD Instrumentational OP Amps applications.
- Video amplifiers
- Television broadcasting equipment
- Television
- Addition operation circuits
- Professional videography
- MP3
- Switching amplifier
- Automotive sensors
- Instrumentation
- High input resistance broadband