TLC074CN

4 Channels 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0001μA 8V 4.5V~16V ±2.25V~8V TLC074 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC074CN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 145
Description: 4 Channels 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0001μA 8V 4.5V~16V ±2.25V~8V TLC074 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIMOS
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	5V
Base Part Number	TLC074
Pin Count	14
Operating Supply Voltage	8V
Number of Channels	4
Operating Supply Current	2.1mA
Nominal Supply Current	11.6mA
Power Dissipation	1.6W
Output Current	57mA
Slew Rate	19V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	1.5pA
Voltage - Supply, Single/Dual (±)	4.5V~16V ±2.25V~8V
Output Current per Channel	57mA
Input Offset Voltage (Vos)	1.9mV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	17V
Voltage - Input Offset	390μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	1.9mV
Input Offset Current-Max (IIO)	0.00005μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC074CN Overview

There is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 14. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 14 pins that make up the linear amplifier. Op amp ic rates 1.9mV for input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.1mA and 10 . It is recommended to keep the voltage gain at 120dB at all times. Instrumentation amplifier has 4 channels on it. The operating supply voltage of instrumentation amplifier is rated 8V voltage.