Parameters |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
1.5pA |
Voltage - Supply, Single/Dual (±) |
4.5V~16V ±2.25V~8V |
Output Current per Channel |
57mA |
Input Offset Voltage (Vos) |
390μV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
17V |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
1.9mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
20-PowerTSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLC074 |
Pin Count |
20 |
Operating Supply Voltage |
8V |
Number of Circuits |
4 |
Operating Supply Current |
2.1mA |
Nominal Supply Current |
11.6mA |
Output Current |
57mA |
Slew Rate |
19V/μs |
Architecture |
VOLTAGE-FEEDBACK |
TLC074CPWPG4 Overview
In order to protect the op amps, a 20-PowerTSSOP (0.173, 4.40mm Width) case is used. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 20 terminations in the next few months. In total, there are 20 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 20 pins. Regarding input offset voltage, op amp rates 390μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 2.1mA . There should be no change in the voltage gain at 120dB. The buffer amp consists of 4 circuits in total. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC074CPWPG4 Features
20 Pins
supply voltage of 5V
120dB voltage gain
TLC074CPWPG4 Applications
There are a lot of Texas Instruments TLC074CPWPG4 Instrumentational OP Amps applications.
- Micro signal measurement
- Oscilloscopes
- Radiation thermometry transducers
- Television broadcasting equipment
- Portable electronic products powered by batteries
- Industrial applications including automation
- PDA
- Automatic control
- MP3
- E-book readers