TLC075CPWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC075 |
| Pin Count | 20 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.1mA |
| Nominal Supply Current | 11.6mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1.5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.9mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC075CPWP Overview
The linear amplifier is packaged in a 20-PowerTSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 20 terminations in the next few months. It consists of a total of 20 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 20 pins are available on the instrumentation amplifier. There is an input offset voltage of 390μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Operational amplifier can operate supply current at 2.1mA. You should keep the voltage gain at 120dB for the time being. This op amp contains 4 circuits. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC075CPWP Features
20 Pins
supply voltage of 5V
120dB voltage gain
TLC075CPWP Applications
There are a lot of Texas Instruments TLC075CPWP Instrumentational OP Amps applications.
- Communication
- Automatic control
- Information processing
- High speed sample
- Power generator
- RF cable systems
- Weak signal detection
- Laptop
- Video conversion and routing
- Medical instruments
