Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
20-PowerTSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLC075 |
Pin Count |
20 |
Operating Supply Voltage |
8V |
Number of Elements |
4 |
Operating Supply Current |
2.1mA |
Nominal Supply Current |
11.6mA |
Power Dissipation |
4.79W |
Output Current |
57mA |
Slew Rate |
19V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
1.5pA |
Voltage - Supply, Single/Dual (±) |
4.5V~16V ±2.25V~8V |
Output Current per Channel |
57mA |
Input Offset Voltage (Vos) |
1.9mV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
17V |
Voltage - Input Offset |
390μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
1.9mV |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC075IPWP Overview
In the package, you will find a 20-PowerTSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. During the past two weeks, there have been close to 20 terminations. Buffer amplifier has a total of 20 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 20 pins. The input offset voltage is 1.9mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 2.1mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 120dB's 120dB family. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 8V.
TLC075IPWP Features
20 Pins
supply voltage of 5V
120dB voltage gain
TLC075IPWP Applications
There are a lot of Texas Instruments TLC075IPWP Instrumentational OP Amps applications.
- Precision measurement
- Polarized electrodes
- Weighing systems
- Cinema or auditorium audio system
- Multiplication circuits
- Comparator
- Medical imaging
- Tablets
- Instrumentation
- Laptop