Parameters |
Technology |
BIMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
TLC080 |
Pin Count |
8 |
Operating Supply Voltage |
8V |
Number of Circuits |
1 |
Operating Supply Current |
1.9mA |
Nominal Supply Current |
2.9mA |
Output Current |
57mA |
Slew Rate |
19V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
2pA |
Voltage - Supply, Single/Dual (±) |
4.5V~16V ±2.25V~8V |
Output Current per Channel |
57mA |
Input Offset Voltage (Vos) |
390μV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
1.4mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
TLC080AIP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. A General Purpose-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 390μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Operational amplifier can operate supply current at 1.9mA. Voltage gain should remain at 120dB. A instrumentation amplifier like this has 1 circuits. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC080AIP Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC080AIP Applications
There are a lot of Texas Instruments TLC080AIP Instrumentational OP Amps applications.
- Exponential operation circuits
- Fission chambers
- Tablets
- Car stereo
- Vehicle electronics
- Precision measurement
- Fast A/D and D/A converters
- Video data acquisition
- Broadcasting
- Professional videography