TLC080CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC080 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 2.9mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.9mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC080CDR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. Op amp rates 390μV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.9mA and 10 . Keeping the voltage gain at 120dB is the best course of action. On this instrumentation amplifier, there are 1 circuits that are connected together. The operating supply voltage of instrumentation amplifier is rated 8V voltage. TR is adopted to pack the instrumentation amplifier.
TLC080CDR Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC080CDR Applications
There are a lot of Texas Instruments TLC080CDR Instrumentational OP Amps applications.
- Precision measurement
- Voltage regulation circuit
- Wireless base stations
- Band-stop filter
- Large motor controllers
- High speed sample
- Band-pass filter
- Video computer boards
- Vehicle electronics
- Medical imaging
