TLC080IDR

57mA per Channel 2pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC080 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC080IDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 850
Description: 57mA per Channel 2pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC080 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Voltage - Supply, Single/Dual (±)	4.5V~16V ±2.25V~8V
Output Current per Channel	57mA
Input Offset Voltage (Vos)	1.9mV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0007μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	390μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	1.9mV
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	710mW
Technology	BIMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	TLC080
Pin Count	8
Operating Supply Voltage	8V
Number of Elements	1
Operating Supply Current	1.9mA
Nominal Supply Current	2.9mA
Power Dissipation	710mW
Output Current	57mA
Slew Rate	19V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	2pA

TLC080IDR Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 1.9mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 1.9mA . Voltage gain should remain at 120dB. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. A TR-shaped amplifier is used to pack the buffer amps.