Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
TLC080 |
Pin Count |
8 |
Operating Supply Voltage |
8V |
Number of Circuits |
1 |
Operating Supply Current |
1.9mA |
Nominal Supply Current |
2.9mA |
Output Current |
57mA |
Slew Rate |
19V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
2pA |
Voltage - Supply, Single/Dual (±) |
4.5V~16V ±2.25V~8V |
Output Current per Channel |
57mA |
Input Offset Voltage (Vos) |
390μV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
1.9mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC080IP Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 390μV for input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 1.9mA can be used to operate this linear amplifier. There should be no change in the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. The operating supply voltage of the buffer op amp is rated at 8V.
TLC080IP Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC080IP Applications
There are a lot of Texas Instruments TLC080IP Instrumentational OP Amps applications.
- High input resistance broadband
- Communication
- Medical instruments
- Gaming industry
- Test and measurement instruments
- Active probe
- Strain gauges
- Power control
- Scintillation detectors
- Multimedia playback equipment