TLC081AIP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC081 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Channels | 1 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 2.9mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC081AIP Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. A Tube case is used for delivering the op amp. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 390μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 1.9mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 120dB. 1 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC081AIP Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC081AIP Applications
There are a lot of Texas Instruments TLC081AIP Instrumentational OP Amps applications.
- Integrator circuits
- Digital cameras
- Wireless base stations
- Television broadcasting equipment
- Broadcasting
- High-frequency data acquisition systems
- E-book readers
- Polarized electrodes
- Radiation thermometry transducers
- Image computer boards
