TLC081IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC081 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Elements | 1 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 2.9mA |
| Power Dissipation | 1.2W |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 1.9mV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.9mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC081IP Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 1.9mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 1.9mA, this op amp ic can operate. Op amp is a member of the 120dB's 120dB family. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC081IP Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC081IP Applications
There are a lot of Texas Instruments TLC081IP Instrumentational OP Amps applications.
- Strain gauges
- E-book readers
- Test and measurement instruments
- Comparator
- Communication
- Band-pass filter
- Power transmission
- Hand-held batteries
- Scintillation detectors
- Biopotential
