TLC0820ACDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 37.5mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC0820 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Power Supplies | 5V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 7.5mA |
| Number of Bits | 8 |
| Input Type | Single Ended |
| Architecture | Flash |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | Parallel |
| Resolution | 1 B |
| Sampling Rate | 392 ksps |
| Voltage - Supply, Analog | 4.5V~8V |
| Voltage - Supply, Digital | 4.5V~8V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 392k |
| Output Bit Code | BINARY |
| Power Consumption | 37.5mW |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Number of Converters | 3 |
| Conversion Rate | 392 ksps |
| Ratio - S/H:ADC | 1:1 |
| Max Supply Voltage (DC) | 8V |
| Differential Nonlinearity | 1 LSB |
| Min Supply Voltage (DC) | 4.5V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC0820ACDWR Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 392k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Flash.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 4.5V~8V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to TLC0820 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 4.5V~8V.The ADC converter operates with the maximal supply voltage of 8V.It operates with the minimal supply voltage of 4.5V.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 37.5mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 392 ksps.There are 3 converters, which will convert numbers to words and figures to words. The digital converter operates with the minimal supply voltage (DC) of 4.5V.The ADC converter operates with the maximal supply voltage (DC) of 8V.It is a type of FPGA belonging to the LinCMOS? series.
TLC0820ACDWR Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 4.5V
5V power supplies
Maximal supply voltage (DC) of 8V
LinCMOS? series
TLC0820ACDWR Applications
There are a lot of Texas Instruments TLC0820ACDWR ADC applications.
- Wireless local loop
- Audio/Video devices
- Communications
- Broadband data applications
- TD-SCDMA, WiMAX
- Multicarrier, multimode digital receivers
- Industrial Process Control
- Music recording
- High Speed Data Acquisition for PCs
- Multiplexed Data Acquisition Systems
