TLC082IDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC082 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 5.8mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.9mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC082IDGNR Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 390μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 1.9mA. 120dB should be the voltage gain. There are 2 circuits on op amps. The operating supply voltage of instrumentation amplifier is rated 8V voltage. An buffer amplifier is packed in a TR-shape according to the design.
TLC082IDGNR Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC082IDGNR Applications
There are a lot of Texas Instruments TLC082IDGNR Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Digital cameras
- Radiation thermometry transducers
- pH (acidity)
- Band-pass filter
- Active probe
- Thermocouples
- High input resistance broadband
- Polarized electrodes
- ECG equipment
