TLC082QDGNRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC082 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Power Supplies | 4.5/16V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 5.8mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Unity Gain BW-Nom | 10000 kHz |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.9mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Voltage Gain-Min | 100000 |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC082QDGNRQ1 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 390μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using a supply current of 1.9mA , this buffer op amp will be able to operate. A instrumentation amplifier like this has 2 circuits. The operating supply voltage of instrumentation amplifier is rated 8V voltage. A TR-shaped amplifier is used to pack the buffer amps. The Automotive, AEC-Q100 stands for the buffer op amp's serial number. This op amp ic can conduct a minimum voltage gain of 100000.
TLC082QDGNRQ1 Features
8 Pins
supply voltage of 5V
TLC082QDGNRQ1 Applications
There are a lot of Texas Instruments TLC082QDGNRQ1 Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Division circuits
- Portable media players
- Wireless base stations
- Band-stop filter
- Automotive sensors
- Computer workstations
- Video conversion and routing
- Signal amplification
- Voltage regulation circuit
