TLC0838CDWR
| Parameters | |
|---|---|
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 3mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC0838 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 5V |
| Configuration | MUX-ADC |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 600μA |
| Number of Bits | 8 |
| Input Type | Differential, Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 4, 7, 8 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1 B |
| Sampling Rate | 20 ksps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 20k |
| Output Bit Code | BINARY |
| Power Consumption | 3mW |
| Linearity Error-Max (EL) | 0.3906% |
| Integral Nonlinearity (INL) | 0.4 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 20 ksps |
| Analog Input Voltage-Max | 5V |
| Output Format | SERIAL |
| Max Supply Voltage (DC) | 5.5V |
| Min Supply Voltage (DC) | 4.5V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
TLC0838CDWR Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 20k Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to TLC0838 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Single number.The ADC converter operates with the maximal supply voltage of 5.5V.4, 7, 8 inputs are employed.It operates with the minimal supply voltage of 4.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 5V.The ADC converter operates from 5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 3mW.The conversion rate of this electrical AD converter is calculated as 20 ksps.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 4.5V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.
TLC0838CDWR Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 4.5V
5V power supplies
1 elements
Maximal supply voltage (DC) of 5.5V
TLC0838CDWR Applications
There are a lot of Texas Instruments TLC0838CDWR ADC applications.
- Multiplexed Data Acquisition Systems
- Micro and pico cell systems, software radios
- Microcontrollers.
- Automotive
- In-building wireless telephony
- Instrumentation and test equipment
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Scientific instruments
- Telecommunications
- Battery Operated Systems
