Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC084 |
Pin Count |
14 |
Operating Supply Voltage |
8V |
Number of Channels |
4 |
Operating Supply Current |
1.9mA |
Nominal Supply Current |
11.6mA |
Power Dissipation |
1.022W |
Output Current |
57mA |
Slew Rate |
19V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
2pA |
Voltage - Supply, Single/Dual (±) |
4.5V~16V ±2.25V~8V |
Output Current per Channel |
57mA |
Input Offset Voltage (Vos) |
1.4mV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
17V |
Voltage - Input Offset |
390μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
1.4mV |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC084AID Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. It consists of a total of 14 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. There are 14 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 1.4mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 1.9mA supply current, this operational amplifier ics can be operated. Maintain 120dB as the voltage gain. Op amp ic has 4 channels. The operating supply voltage of the buffer op amp is rated at 8V.
TLC084AID Features
14 Pins
supply voltage of 5V
120dB voltage gain
TLC084AID Applications
There are a lot of Texas Instruments TLC084AID Instrumentational OP Amps applications.
- Subtraction operation circuits
- Comparator
- Multiplication circuits
- Gaming industry
- Signal amplification
- Thermocouples
- Integrator circuits
- High/low-pass filter circuit
- High gain DC amplifier
- Navigation