banner_page

TLC084CDR

57mA per Channel 2pA 80 dB Instrumentational OP Amps 0.0001μA 8V 4.5V~16V ±2.25V~8V TLC084 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC084CDR
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 822
  • Description: 57mA per Channel 2pA 80 dB Instrumentational OP Amps 0.0001μA 8V 4.5V~16V ±2.25V~8V TLC084 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number TLC084
Pin Count 14
Operating Supply Voltage 8V
Number of Elements 4
Operating Supply Current 1.9mA
Nominal Supply Current 11.6mA
Power Dissipation 1.022W
Output Current 57mA
Slew Rate 19V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 2pA
Voltage - Supply, Single/Dual (±) 4.5V~16V ±2.25V~8V
Output Current per Channel 57mA
Input Offset Voltage (Vos) 1.9mV
Bandwidth 10MHz
Unity Gain BW-Nom 10000 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.0001μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 17V
Voltage - Input Offset 390μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00005μA
Programmable Power NO
Nominal Gain Bandwidth Product 10MHz
Max I/O Voltage 1.9mV
Input Offset Current-Max (IIO) 0.00005μA
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC084CDR Overview


In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 14 pins. There is an input offset voltage of 1.9mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . An 1.9mA volt supply current is needed for this linear amplifier to operate. 120dB should remain the voltage gain. Op amp has total of 4 elements. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TR axis.

TLC084CDR Features


14 Pins
supply voltage of 5V
120dB voltage gain

TLC084CDR Applications


There are a lot of Texas Instruments TLC084CDR Instrumentational OP Amps applications.

  • Laptop
  • Measurements of Wheatstone bridge
  • Home audio systems
  • Signal transformation
  • Instrumentation
  • Division circuits
  • Portable docking station
  • Logarithmic operation circuits
  • Scintillation detectors
  • Communication

Write a review

Note: HTML is not translated!
    Bad           Good